PCB Fuse Holder Clip Guide: 5×20, 6×30 & 10×38 Solder Mount | EssFuse

PCB Fuse Holder Clip: Technical Guide for 5×20, 6×30 & 10×38

A PCB fuse holder clip is a through-hole solder-mount component that secures a cylindrical fuse directly onto a printed circuit board. It is the most space-efficient and economical circuit protection solution for switch-mode power supplies, chargers, meters and consumer electronics, enabling fast tool-free fuse replacement on the board.

Technische Spezifikationen

5x20mm: Fuse Size 5×20 mm, Rated Current up to 10A, Rated Voltage 250V AC/DC, Contact Nickel-plated brass, Mounting Through-hole solder, Orientation Horizontal / Vertical.

6x30mm: Fuse Size 6×30 mm, Rated Current up to 16A, Rated Voltage 250-500V, Contact Nickel-plated brass, Mounting Through-hole solder, Orientation Horizontal.

10x38mm: Fuse Size 10×38 mm, Rated Current up to 40A, Rated Voltage 1000V AC/DC, Contact Silver-plated / brass, Mounting Through-hole solder, Orientation Vertical / Horizontal.

Key Design Features

PCB fuse clips use nickel-plated brass contacts to ensure low contact resistance and reliable conductivity. Dual-clip designs support two fuses, and flame-retardant housing options are available for higher safety requirements in industrial boards.

How to Choose the Right Clip

1. Match the clip to the fuse diameter (5×20, 6×30 or 10×38).
2. Select orientation – horizontal, vertical, or dual – based on your board layout.
3. Confirm current rating meets your circuit protection requirement.
4. Choose flame-retardant housing for industrial or high-temperature applications.

Anwendungen

• Switch-mode power supplies (SMPS)
• Battery chargers and adapters
• Consumer electronics and appliances
• Industrial control boards
• Solar inverters and energy storage (ESS)

Warum EssFuse wählen?

EssFuse supplies high-quality PCB fuse clips in 5×20, 6×30 and 10×38 sizes, with single, dual and horizontal designs, flame-retardant options and bulk/OEM support.

Häufig gestellte Fragen

What fuse sizes do PCB fuse clips fit?

Standard clips fit 5x20mm fuses; 6x30mm and 10x38mm cartridge fuse clips are also available.

How is a PCB fuse clip mounted?

It is a through-hole component soldered directly onto the PCB. No panel cut-out is required.

Can a PCB fuse clip handle high current?

Yes. 10x38mm clips handle higher currents, typically up to 10-40A depending on rating.

Are flame-retardant versions available?

Yes. We offer flame-retardant and high-temperature resistant versions for industrial boards.

Do you support bulk and custom orders?

Yes. We support bulk supply, dual-clip designs and custom specifications. Contact us for a quote.

Need PCB fuse clips for your design? Browse our PCB fuse holder clips or contact us

PCB Fuse Holder Clip | 5×20 6×30 10×38 fuse holder | EssFuse

Sicherungshalter für Einbaupanel | Sicherungssockel für Panelmontage | EssFuse

Sicherungshalter | Hersteller von Einbau-, Leiterplatten- und Inline-Sicherungshaltern | EssFuse

Kabelbaum-Sicherungshalter | Vorverdrahteter Inline-Sicherungshalter | EssFuse