GF‑702A horizontal mini‑car insert fuse holder PCB mount clip, 30A 500VAC
GF‑702A horizontal mini‑car insert fuse holder PCB mount clip, horizontal PCB soldering, PBT UL‑94V‑0 housing, tin‑plated brass contact for GF‑C series mini blade fuses.
Need a Fuse for Your Project?
Share your requirements with us for product guidance and a quotation.
Product size installation diagram:
GF‑702A horizontal mini‑car insert fuse holder PCB mount clip
GF‑702A horizontal mini‑car insert fuse holder PCB mount clip is a horizontal PCB‑soldered fuse clip specially designed for GFEFUSE® GF‑C series mini‑car insert mini‑blade fuses. It adopts 0.3 mm thick brass contacts with tin‑plated finish and flame‑retardant PBT UL‑94V‑0 base. Delivers stable electrical performance, qualified insertion‑extraction force and high dielectric strength for automotive PCB over‑current and short‑circuit protection. It matches our GF‑C mini blade fuse.
Key Features
- Model: GF‑702A horizontal mini‑car insert fuse holder PCB mount clip
- Compatible Fuse: GFEFUSE® GF‑C series mini‑car insert mini‑blade fuses
- Contact Material: Brass, thickness T=0.3 mm, tin‑plated
- Base Housing: PBT UL‑94V‑0 flame retardant plastic
- Mounting Method: PCB horizontal through‑hole soldering installation
- Electrical Rating: 30A @ 500VAC
- Minimum insertion & extraction force: 1kg
- High dielectric strength, low contact resistance
- Max temperature rise: 130°
- Recommended soldering condition: 260 ℃ for 3 seconds
- Compact footprint, suitable for limited PCB space
- Good vibration resistance for automotive working environment
Technische Spezifikationen
| Product Model | GF‑702A horizontal mini‑car insert fuse holder PCB mount clip |
| Matching Fuse | GFEFUSE® GF‑C Series Mini‑car Insert Mini‑blade Fuse |
| Contact | Brass T=0.3mm, Tin‑plated |
| Base Material | PBT UL‑94V‑0 Flame Retardant |
| Electrical Rating | 30A @ 500VAC |
| Insertion & Extraction Force | Min. 1kg |
| Dielectric Strength | Min. AC 1000V |
| Contact Resistance | Max. 50mΩ |
| Max Temperature Rise | 130° |
| Insulation Resistance @500V DC | Min. 100MΩ |
| Recommended Soldering Condition | 260 ℃, 3 seconds |
| Installation | PCB Horizontal Through‑hole Mount |
Application Scenarios
GF‑702A horizontal mini‑car insert fuse holder PCB mount clip is widely used for automotive ECU, vehicle lighting control boards, on‑board power modules and other automotive electronic PCBs. It supports fast replacement for GF‑C mini‑blade fuses when overload or short‑circuit fault occurs.
Installation Notes
- Horizontal through‑hole soldering on PCB; confirm component footprint before PCB layout
- Only compatible with GF‑C series mini‑blade fuses, not fit ATO / Maxi blade fuses
- Do not exceed rated current and voltage in practical application
- Observe 260 ℃‑3s soldering requirement to avoid plastic base damage
- Periodic inspection is recommended for equipment working under continuous vehicle vibration
Packing & Supply
Bulk packing or tape & reel packing available. Sample testing support, OEM customization and stable mass‑volume supply for automotive electronics manufacturers.
Häufig gestellte Fragen
Q: Which fuse matches GF‑702A horizontal mini‑car insert fuse holder PCB mount clip?
A: It is designed for GFEFUSE® GF‑C series mini‑car insert mini‑blade fuses.
Q: What is the mounting style of GF‑702A?
A: GF‑702A adopts horizontal PCB through‑hole soldering installation.
Q: What is the electrical rating for GF‑702A?
A: Rated 30A @500VAC, minimum insertion‑extraction force is 1kg.
Q: What is the soldering requirement for GF‑702A?
A: Recommended soldering condition: 260 ℃ for 3 seconds.
