Portafusibles ANL de una entrada y dos salidas, atornillable, PBT+GF UL94-V0 30-500A 12-125V CC
GFEV(500A2) one‑in two‑out ANL bolt‑down fuse holder, PBT+GF UL94‑V0,30‑500A 12‑125V DC, fits ANL‑A fork‑bolt fuses.
¿Necesitas un fusible para tu proyecto?
Comparta con nosotros sus requisitos para obtener asesoramiento sobre productos y un presupuesto.
GFEV(500A2) one‑in two‑out anl bolt‑down fuse holder is multi‑circuit fork‑bolt automotive fuse box with double‑in double‑out structural design. It adopts PBT+GF UL‑94 V‑0 flame‑retardant base and PC protective top cover, equipped with class 8.8 high‑strength screws. Electrical rating reaches 30A‑500A DC and 12‑125V DC, perfectly compatible with GFEFUSE® ANL‑A series fork‑bolt automobile fuses. Widely used for car battery assemblies, new‑energy vehicles, car modification, RV camper, heavy‑duty trucks and high‑power automotive wiring harness & power‑supply systems. Note: product dimensions are subject to change without prior notification.
Características principales
- Base housing: PBT+GF composite material, UL‑94 V‑0 flame‑retardant safety grade
- Top protective cover: PC material for internal component isolation and dust‑proof performance
- Fasteners: Class 8.8 high‑strength screws for reliable heavy‑current clamping
- Electrical performance: 30A‑500A DC rated current; 12‑125V DC operating voltage
- Special one‑in two‑out layout, realizes one main input divided into two independent protected output branches
- Matched for GFEFUSE® ANL‑A series fork‑bolt automobile fuses
- Suitable for RV, heavy‑truck, auto refit, new‑energy vehicle and high‑power harness projects
- Note: Product dimensions subject to revision without advance notice.
Especificaciones generales
| Artículo | Parámetro |
|---|---|
| Modelo de producto | GFEV(500A2) one‑in two‑out ANL bolt‑down fuse holder |
| Material base | PBT+GF, UL‑94 V‑0 flame retardant |
| Top Cover Material | PC |
| Sujetadores | Class 8.8 high‑strength screws |
| Corriente continua nominal | 30A‑500A DC |
| Voltaje de CC de funcionamiento | 12-125 V CC |
| Fusible compatible | GFEFUSE® ANL‑A series fork‑bolt automobile fuses |
| Circuit Configuration | One‑In Two‑Out multi‑circuit distribution |
| Observaciones | Dimensions subject to change without prior notice |
Escenarios de aplicación típicos
- Automotive battery assembly multi‑branch DC power‑distribution protection
- New‑energy vehicle auxiliary circuit multi‑loop protective assembly
- Car modification & RV camper multi‑output power supply system
- Heavy‑duty truck main and auxiliary battery protection circuits
- High‑power automotive wiring harness and industrial mobile power‑supply equipment
Pair this gfev(500a2) one‑in two‑out anl bolt‑down fuse holder with our ANL‑A fork‑bolt automotive fuses to build a complete multi‑branch heavy‑current DC protective assembly.
GFEVA500A2AnL-Bolt-down-fuse-holder
Instrucciones de instalación y seguridad
- Disconnect DC main‑power before fuse installation or replacement to avoid short‑circuit hazard.
- Apply proper tightening torque for class 8.8 high‑strength screws; insufficient torque will trigger abnormal over‑heating under heavy‑current load.
- Select ANL‑A series fork‑bolt fuse according to actual continuous working‑current for each output branch.
- For sealed high‑temperature compartments, temperature derating assessment shall be performed.
- Regularly inspect screw tightness for vehicle vibration‑prone operating environments.
- Confirm the latest official dimension drawing before bulk purchase as product size may be revised without advance notice.
Preguntas frecuentes
Q: What is gfev(500a2) one‑in two‑out anl bolt‑down fuse holder?
A: GFEV(500A2) one‑in two‑out ANL bolt‑down fuse holder is multi‑circuit automotive fuse box with PBT+GF UL‑94 V‑0 base and PC cover. Adopting one‑in two‑out layout, it supports 30‑500A,12‑125V DC and works with ANL‑A fork‑bolt fuses for RV, heavy‑truck and new‑energy‑vehicle multi‑branch DC‑protection.
Q: What are the material specifications of this fuse holder?
A: Base is PBT+GF UL‑94 V‑0 flame‑retardant composite material; top cover is PC; fastening parts are class 8.8 high‑strength screws.
Q: Which fuse fits GFEV(500A2) fuse holder?
A: It is specially matched for GFEFUSE® ANL‑A series fork‑bolt automobile fuses.
Q: What electrical parameters does GFEV(500A2) support?
A: Rated DC current:30A‑500A DC; operating DC voltage:12‑125V DC.
Q: What is the advantage of one‑in two‑out design?
A: One main power input is divided into two independent protected output branches, which simplifies multi‑loop wiring inside limited installation‑space for vehicles and mobile equipment.
Q: Will product dimensions be adjusted?
A: Product dimensions are subject to change without prior notification. Please verify official technical drawing before placing bulk‑order.
Solicitar presupuesto y asistencia técnica
Please provide your quantity requirement and application‑environment description. Our engineering team can supply dimension drawing, bulk‑price quotation and component‑selection guidance for your multi‑circuit heavy‑current DC‑projects.
