치수(mm)

GFEVT1000-A-59E

GFEVT1000‑A‑59E Series Square‑Body Fast‑Acting aR DC Fuse 1000VDC 100‑800A

GFEVT1000‑A‑59E Series Square‑Body Fast‑Acting aR DC Fuse 1000VDC 100‑800A is Size 2# square‑body flush‑end contact bolt‑mount aR‑class high‑speed DC fuse for new‑energy high‑voltage DC‑system applications. Rated voltage 1000VDC, max breaking capacity 50kA@1000VDC (Time Constant ≤5ms), minimum breaking current ≥3In. Mechanical structure adopts flush‑end contact with 2‑M10 mounting holes; max hole depth 11.5mm, min thread length 9.5mm. It features superior cycling capability, low watt losses, excellent anti‑voltaic impingement and wide ambient‑temperature adaptability, high mechanical shock & vibration resistance. Performance references UL‑248‑1/UL‑248‑13, IEC 60269‑1/IEC 60269‑4, RoHS compliant; REACH document is available upon request. It provides dependable short‑circuit protection for energy‑storage cabinets, maintenance safety disconnect switches, lithium‑ion battery‑packs and DC relay backup units.

GFEVT1000-A-59E-Series.-100-800A-1000Vdc-fast-acting-fuse

주요 특징

• Model Series: GFEVT1000‑A‑59E Square‑Body Fast‑Acting aR DC Fuse
• Rated Voltage: 1000 VDC
• Current Range: 100A‑800A; Operation Class: aR (semiconductor short‑circuit protection)
• Max Breaking Capacity: 50kA @1000VDC (Time Constant ≤5ms)
• Minimum Breaking Current: ≥3 In
• Flush‑end contact design, 2‑M10 mounting holes; max hole depth 11.5mm, min thread length 9.5mm
• Outstanding cycling capability & low watt‑loss characteristic
• Ultra‑fast fault‑current interruption under high fault‑current condition
• Excellent anti‑arc performance, broad operating temperature adaptability
• Size 2# square‑body outline, optimized for compact cabinet layout
• High mechanical shock‑vibration resistance for new‑energy cabinet environment
• Compliance: Referenced to UL‑248‑1/UL‑248‑13, IEC 60269‑1/IEC 60269‑4, RoHS; REACH on request

General Technical Specifications

Part Number List & Electrical Parameters(Test@1000VDC,50kA,Time‑Constant≤5ms)

응용 시나리오

GFEVT1000‑A‑59E Series Square‑Body Fast‑Acting aR DC Fuse 1000VDC 100‑800A is optimized for 1000VDC high‑voltage DC new‑energy projects. Widely applied in energy‑storage power‑station cabinets, maintenance safety disconnect / disconnector devices, lithium‑ion battery‑pack protection and DC relay backup short‑circuit protection. aR‑class fast‑acting characteristic provides reliable fault‑current protection for power semiconductors and high‑voltage DC‑side power components.

Installation & Operating Notes

• Square‑body flush‑end contact with 2‑M10 mounting holes; max hole depth 11.5mm, min thread length 9.5mm. Apply specified bolt torque to avoid poor contact and over‑heating risk.
• Recommended continuous operating current ≤75% of fuse rated‑current. Apply temperature‑derating‑factor Kt for ambient temperature above +40℃.
• Altitude ≤2000m no‑derating; closed‑box installation between 2000‑4500m: derate 2%‑5% rated‑current per 1000m elevation increase. Re‑check insulation clearance according to GB/T16935.1 for high‑altitude deployment.
• Supports vertical, horizontal and inclined mounting; minimize negative gravity‑vibration impact on electrical contact performance.
• Forced‑air cooling improves heat dissipation and increases allowable operating current, refer to Kv correction coefficient.
• Do NOT replace fuse under live DC load unless equipped with certified load‑break switchgear, strictly follow 1000VDC high‑voltage safety operation procedure.
• Replace fuse immediately if shell crack, deformation or mechanical damage appears.
• Additional reliability validation test required for extremely high‑vibration industrial working conditions.
• Select matched copper conductor cross‑section for terminals to control temperature‑rise performance.
• Ordering reminder: part numbers with remark “Pending”, please confirm factory RoHS & REACH status before order placement.

Packing & Storage Requirements

Standard original‑box bulk package. Store in clean, dust‑free warehouse. Storage temperature:‑40℃~+120℃; humidity limit: RH≤70%@40℃, RH≤80%@30℃, RH≤90%@20℃. Sample testing support, OEM customization, stable mass‑volume supply for energy‑storage and new‑energy equipment manufacturers. REACH declaration available upon customer request.

자주 묻는 질문

Q: What are ratings for GFEVT1000‑A‑59E Series Square‑Body Fast‑Acting aR DC Fuse?
A: Rated 1000VDC, current range 100‑800A, aR fast‑acting class, max breaking capacity 50kA@1000VDC(Time Constant ≤5ms), minimum breaking current ≥3In, flush‑end contact with 2‑M10 mounting holes, Size 2# square‑body.

Q: What is mechanical dimension & mounting info of GFEVT1000‑A‑59E?
A: Size 2# square‑body, flush‑end contact with 2‑M10 mounting holes; max hole depth 11.5mm, min thread length 9.5mm.

Q: What standards does GFEVT1000‑A‑59E comply with?
A: Performance referenced to UL‑248‑1/UL‑248‑13, IEC60269‑1/IEC 60269‑4, RoHS compliant; REACH document available on request; partial models REACH status pending.

Q: What are typical applications for GFEVT1000‑A‑59E?
A: Energy‑storage cabinets, maintenance safety disconnect switches, lithium‑ion battery‑pack and DC relay backup short‑circuit protection.

Q: What does “Pending” mean in remark column?
A: Pending means RoHS / REACH documentation is under processing, please confirm with factory before placing purchase order.