MICRO 2 blade fuse tap, automotive fuse holders
MICRO 2 blade automotive fuse tap for MICRO2 15A plug-in fuse, built UL94V0 flame retardant, 1015‑16AWG wire, Φ6 125℃ 600V heat shrink tubing, blue center terminal with tight heat seal and stable crimping quality.
MICRO 2 Blade Fuse Tap (Automotive Fuse Tap)
개요
This MICRO 2 blade fuse tap is an automotive add‑a‑fuse adapter designed for MICRO2 plug‑in fuses up to 15AMP. The internal housing adopts UL94V‑0 flame retardant material. It comes with 1015‑16AWG wire, Φ6 heat shrink tubing rated 125℃ and 600V, and blue center terminal. Every unit is heat sealed without gaps or burrs. The terminal is firmly crimped, free of broken wires, short circuits, open circuits and misalignment, with excellent conductivity and no insulation damage on wires.
제품 사양
| 목 | 값 |
| Product Name | MICRO 2 Blade Fuse Tap (Automotive Fuse Tap) |
| 적용 가능한 퓨즈 | MICRO2 automotive plug‑in fuse |
| 정격 전류 | 15AMP |
| Internal Flame Retardant Grade | UL94V‑0 |
| Wire Spec | 1015‑16AWG |
| Heat Shrink Tubing | Φ6, 125℃, 600V |
| Terminal | Blue center terminal |
| Quality Standard | Heat sealed without gaps or burrs; firmly crimped, no broken wires, short circuits, open circuits, misalignment; good conductivity; no wire insulation injury |
주요 특징
- Made for MICRO2 blade fuse, 15A rating, easy add‑on circuit for vehicles
- Internal UL94V‑0 flame retardant construction for higher safety
- 1015‑16AWG stranded wire, stable current transmission
- Φ6 heat shrink tube, 125℃ temperature resistance and 600V voltage rating, insulation protection
- Blue center terminal with standardized crimping process
- Tight heat sealing, no sharp burrs, clean workmanship
- Strict quality control: no broken strands, short/open circuit, offset crimp or jacket damage
응용 프로그램
This MICRO 2 fuse tap is widely used for automotive electrical modification:
- Car dash cam, GPS tracker, parking sensor power supply
- LED light bar, fog light, interior light upgrade
- Mobile radio, charger and other auxiliary accessories
- Truck, SUV, off‑road vehicle extra circuit tapping
자주 묻는 질문
Q1: Which fuse type works with this MICRO 2 fuse tap?
A1: It fits MICRO2 automotive plug‑in blade fuse, rated for 15AMP.
Q2: What wire and heat shrink tube does this fuse tap use?
A2: Wire: 1015‑16AWG; Heat shrink tubing: Φ6, 125℃, 600V.
Q3: What is the flame retardant rating inside the MICRO 2 fuse tap?
A3: The internal material reaches UL94V‑0 flame retardant grade.
Q4: What quality checks are performed on the terminals?
A4: Heat sealed without gaps or burrs; firmly crimped, no broken wires, short circuits, open circuits or misalignment, good conductivity and no wire skin injury.
