Description
Blade fuse holder Short footed mini blade fuse tap
Description
1. Short footed mini blade fuse tap (car fuse holder)Mini Fuse Tap Kit
Suitable for short pin MIni car plug-in fuse rated current: 15AMP
Flame retardant grade: 94V-0 internal
1. Wire: 1015-16AWG
2. Heat shrink tubing: Φ 6 125 degrees 600V
3. Terminal: Blue center terminal Remarks: Heat sealed without gaps or burrs, the terminal is firmly crimped without any broken wires, short circuits, open circuits, misalignment, and good conductivity; There is no injury to the thread skin,
Mini blade fuse tap (add‑a‑circuit / piggyback fuse adapter) is a simple, time‑saving automotive wiring accessory. It lets you add a new 12V/24V DC circuit without cutting or splicing factory wires, by plugging into an existing mini blade fuse slot. Widely used in cars, motorcycles, ATVs, 4×4s, and marine vehicles for auxiliary power taps.
Core Specifications
- Fuse Type: Standard mini blade fuse (5A–30A)
- Voltage: 12V / 24V DC (automotive standard)
- Material: Flame‑retardant plastic housing + nickel‑plated brass terminals
- Output: Piggyback slot for new fuse + pass‑through for original circuit
- Installation: Plug‑and‑play, no wire cutting
- Certifications: RoHS compliant, SAE automotive grade
How It Works
- Remove an existing mini blade fuse from the fuse box.
- Plug the fuse tap into the empty slot.
- Insert the original fuse into the tap’s pass‑through slot.
- Insert a new fuse (for your accessory) into the piggyback slot.
- Connect your accessory wire to the tap’s output terminal.
Result: Original circuit works normally; new circuit gets safe, fused power.
Key Benefits
✅ No Wire Cutting (Factory‑Safe)
Preserves original wiring harness; avoids voiding warranties or causing electrical faults.
✅ Plug‑and‑Play, 1‑Minute Install
No crimping/soldering tools needed; fits standard mini fuse boxes.
✅ Dual Fuse Protection
Original circuit + new auxiliary circuit each have independent fuses; prevents cross‑circuit overloads.
✅ Compact & Vibration‑Resistant
Small body fits tight fuse boxes; reinforced contacts stay secure in engine bay/rough‑road conditions.
✅ Reversible & Removable
Easily unplugged to restore factory wiring; perfect for temporary or seasonal accessories.
Common Applications
- Automotive: Dash cams, GPS, phone chargers, LED lights, parking sensors
- Motorcycle/ATV/4×4: Auxiliary lights, USB chargers, heated grips
- Marine: Navigation lights, radios, pumps, 12V accessories
- RV/Trailer: Small appliances, lighting, solar controllers
Installation Tips
- Choose a switched fuse slot (ignition‑on power) for accessories like dash cams.
- Use the correct new fuse rating (match your accessory’s current draw).
- Secure loose wires with zip ties to avoid vibration damage.
- Avoid overloading the tap: max 30A total (original + new fuse).
FAQ
What is a mini blade fuse tap?
A piggyback adapter that adds a 12V/24V circuit via a mini fuse slot—no wire cutting.
Does it work with mini blade fuses?
Yes—designed exclusively for standard mini blade fuses (5A–30A).
Is it safe for factory wiring?
A: Very safe—no cutting, no splicing; preserves warranty and original harness.
Max current rating?
Typically 30A total (original + new fuse); follow accessory current limits.
Can I use it for dash cams?
Perfect for dash cams, GPS, and other 12V/24V auxiliary accessories.