Giá đỡ cầu chì bắt vít ANL, PBT-GF30% Khối cầu chì DC UL94-V0
ANL bolt‑on fuse holder, PBT‑GF30% UL94‑V0, 30A‑800A 12‑250V DC, fits ANL‑A series bolt‑on fuses.
Bạn cần cầu chì cho dự án của mình?
Hãy chia sẻ yêu cầu của bạn với chúng tôi để được tư vấn sản phẩm và báo giá.
ANS‑800 anl bolt‑on fuse holder is heavy‑duty high‑current ANL‑style bolt‑on fuse block for DC power protection circuits. Constructed with PBT+GF30% UL‑94 V‑0 flame‑retardant base, this fuse holder adopts 8.8‑grade high‑strength screws and stainless steel nuts. It supports 30A‑800A DC current and 12‑250V DC working voltage, and is fully compatible with GFEFUSE® ANL‑A series bolt‑on fuses. Widely applied for automotive wiring harnesses, new‑energy vehicle control boxes, DC power supplies, battery‑protection circuits and communication‑equipment power distribution.
Các tính năng chính
- Housing: PBT + GF30% composite material, flame‑retardant UL‑94 V‑0 grade for enhanced safety
- Fastener set: 8.8 grade high‑strength screws paired with corrosion‑resistant stainless‑steel nuts
- Electrical performance: 30A‑800A DC, 12‑250V DC for heavy‑current DC application scenarios
- Designed to match GFEFUSE® ANL‑A series bolt‑on fuses
- Suitable for auto harness, EV control cabinet, battery protection and communication power‑supply equipment
- Robust mechanical structure, stable performance under vehicle vibration environment
- Important note: Product dimensions are subject to change without prior notice.
Thông số kỹ thuật chung
| Mục | Tham số |
|---|---|
| Người mẫu | ANS‑800 ANL bolt‑on fuse holder |
| Vật liệu cơ bản | PBT + GF30%, UL‑94 V‑0 flame retardant |
| Ốc vít | 8.8‑grade high‑strength screw, stainless steel nut |
| Dòng điện DC định mức | 30A‑800A DC |
| Điện áp DC hoạt động | 12‑250V DC |
| Cầu chì phù hợp | GFEFUSE® ANL‑A series bolt‑on fuse |
| Ghi chú | Dimensions subject to change without prior notification |
Outline Dimension Data
| Mô tả kích thước | Kích thước (mm) |
|---|---|
| Tổng chiều dài | 86 |
| Base Width | 24 |
| Terminal Center Spacing | 42 |
| Chiều cao tổng thể | 62 |
| Mounting Hole Diameter | Ø6.5 |
| Terminal Thread | M8 |
Application Scenarios
- High‑current protection for automotive wiring harness assemblies
- New‑energy vehicle internal control‑box DC power circuits
- DC power‑supply equipment and battery‑protection circuits
- Communication equipment power‑distribution systems
- RV, marine and stationary energy‑storage heavy‑duty DC systems
Pair this ans‑800 anl bolt‑on fuse holder with our ANL‑A bolt‑on fuses to implement a complete heavy‑current DC protection solution.
Hướng dẫn lắp đặt và an toàn
- Disconnect DC power source before installation or fuse replacement to avoid short‑circuit hazards.
- Apply proper tightening torque for M8 fasteners; insufficient torque will result in abnormal over‑heating under high‑current load.
- Select ANL‑A series bolt‑on fuse according to actual continuous working current of the circuit.
- Carry out temperature derating assessment if installed inside sealed high‑temperature compartments.
- Regularly inspect nut tightening status for vibration‑intensive vehicle‑mounted applications.
- Confirm official drawing prior to bulk purchase as dimensions may be revised without advance notice.
Câu hỏi thường gặp
Q: What is ans‑800 anl bolt‑on fuse holder?
A: ANS‑800 anl bolt‑on fuse holder is heavy‑duty ANL‑style bolt‑on fuse block with PBT+GF30% UL‑94 V‑0 flame‑retardant housing. It works with ANL‑A bolt‑on fuses for 30A‑800A,12‑250V DC circuits for EV, automotive, battery and communication‑equipment projects.
Q: Which fuse can match with this ANS‑800 holder?
A: It is designed for GFEFUSE® ANL‑A series bolt‑on fuses.
Q: What are the electrical ratings of ANS‑800?
A: Rated DC current:30A‑800A DC; operating DC voltage:12‑250V DC.
Q: What is the material of the fuse holder base?
A: PBT + GF30% composite material, UL‑94 V‑0 flame‑retardant grade, fitted with 8.8‑grade high‑strength screws and stainless‑steel nuts.
Q: Are product dimensions subject to change?
A: Yes, dimensions may change without prior notice. Please request and verify technical drawings before placing bulk‑order.
Get Quotation & Technical Documents
Please send us your quantity requirement and working‑condition description. Our engineering team will provide dimension drawing, bulk‑price quotation and component‑selection advice for your DC projects.
