Adaptador de fusible de cuchilla mini con pie corto, portafusibles para coche, kit de adaptador de fusible mini para fusible MINI de 15 A con clavija corta
Short Footed Mini Blade Fuse Tap car fuse holder Mini Fuse Tap Kit for short pin MINI 15A plug-in fuse, 1015-16AWG wire, Φ6 125℃ 600V heat shrink tube, blue center terminal, UL94V0 flame retardant, solid crimp for automotive circuit tapping.
¿Necesitas un fusible para tu proyecto?
Comparta con nosotros sus requisitos para obtener asesoramiento sobre productos y un presupuesto.
Short Footed Mini Blade Fuse Tap (Car Fuse Holder) Mini Fuse Tap Kit
Descripción general
This Short Footed Mini Blade Fuse Tap, also known as car fuse holder and Mini Fuse Tap Kit, is an automotive add‑a‑fuse adapter specially designed for short pin MINI car plug‑in fuses rated at 15AMP. Its internal structure adopts UL94V‑0 flame retardant material for high safety. It comes with 1015‑16AWG wire, Φ6 heat shrink tubing rated 125℃ and 600V, and blue center terminal. Every unit is heat sealed without gaps or burrs. The terminal is firmly crimped, free of broken wires, short circuits, open circuits and misalignment, with excellent conductivity and no damage to wire insulation.
Especificaciones del producto
| Artículo | Valor |
| Nombre del producto | Short Footed Mini Blade Fuse Tap (Car Fuse Holder) Mini Fuse Tap Kit |
| Fusible aplicable | Short pin MINI automotive plug‑in fuse |
| Corriente nominal | 15 amperios |
| Grado de retardante de llama interno | UL94V‑0 |
| Especificaciones del cable | 1015‑16AWG |
| Tubos termorretráctiles | Φ6, 125℃, 600V |
| Terminal | Terminal del centro azul |
| Quality Standard | Heat sealed without gaps or burrs; firmly crimped, no broken wires, short circuits, open circuits, misalignment; good conductivity; no wire insulation injury |
Características principales
- Short foot design for short pin MINI blade fuse, 15A rating, plug-and-play add-on circuit for vehicles
- Internal UL94V‑0 flame retardant material to improve electrical safety
- 1015‑16AWG wire with stable current carrying capacity
- Φ6 heat shrink tube, high temperature resistance and reliable insulation protection
- Blue center terminal with standardized crimping process
- Smooth heat sealed surface, no sharp burrs or gaps
- Strict quality inspection: no broken strands, short / open circuit, offset crimp or wire jacket damage
Aplicaciones
This short footed mini fuse tap kit is widely used for automotive electrical modification:
- Dash camera, GPS tracker and parking monitoring power supply
- LED light bar, fog lamp and interior ambient light upgrade
- Car charger, radio and other automotive auxiliary accessories
- SUV, truck and off-road vehicle additional power circuit
Preguntas frecuentes
Q1: What fuse fits this Short Footed Mini Blade Fuse Tap?
A1: It is suitable for short pin MINI automotive plug‑in blade fuse with 15AMP rating.
Q2: What wire and heat shrink tube are used?
A2: Wire: 1015‑16AWG; Heat shrink tubing: Φ6, 125℃, 600V.
Q3: What is the flame retardant grade of this fuse tap?
A3: The internal material reaches UL94V‑0 flame retardant standard.
Q4: What are the crimping and sealing quality requirements?
A4: Heat sealed without gaps or burrs; firmly crimped, no broken wires, short circuits, open circuits or misalignment, good conductivity and no wire skin injury.
