5x20mm Panel Mount Fuse Holder | 10A 250V Industrial Fuse Base
Industrial‑grade panel mount fuse holder compatible with 5×20mm glass and ceramic cartridge fuses, PBT UL94 V0 flame‑retardant housing and 0.5mm phosphor bronze terminals, rated 10A 250V/125V AC/DC, 3000V AC power‑frequency withstand voltage, built for industrial cabinets, power supplies and small‑power equipment overcurrent protection.
Panel mount fuse holder for 5x20mm cartridge fuses is compact panel‑installed over‑current‑protection component for low‑voltage electrical systems. This fuse holder adopts high‑strength PBT insulating housing together with 0.5mm thick phosphor‑bronze conductive terminals, offering robust insulation, stable contact and reliable over‑current protection for both AC and DC circuits. The threaded‑nut panel‑mount design supports quick front‑side fuse replacement without opening the equipment enclosure, widely adopted in industrial control cabinets, switching power supplies, household appliances and instrumentation front panels.
핵심 제품 특징
- Compatible with standard 5×20mm glass / ceramic cartridge fuses, mainstream specification for low‑voltage small‑power protection
- Rated 10A at 250V / 125V AC/DC; 50A breaking capacity for effective fault‑current interruption
- PBT (polybutylene terephthalate) housing, UL94 V0 flame‑retardant grade; excellent heat‑resistance, arc‑suppression and dielectric performance
- 0.5mm thick phosphor bronze terminals, good spring tension, stable clamping force, contact resistance below 5 mΩ
- 3000V AC power‑frequency withstand voltage; insulation resistance >100 MΩ for high‑safety operation
- Threaded‑nut panel‑mount structure, standard panel cut‑out dimension; easy front‑panel fuse servicing
- RoHS‑compliant, satisfies global electronics environmental‑protection and safety standards
Compared with PCB‑mount fuse clips, this panel‑mount variant enables convenient front‑panel fuse replacement during maintenance. PBT material brings outstanding thermal stability, making it a preferred solution for power adapters, bench‑top instruments and general‑purpose low‑voltage control circuits.
전체 기술 사양
| 사양 항목 | 매개변수 값 |
|---|---|
| 모델 | OP520 |
| 호환 퓨즈 | 5 × 20 mm glass & ceramic cartridge fuse |
| 정격 전류 | 10A |
| 정격 전압 | 250V / 125V AC / DC |
| 파괴 용량 | 50A |
| 전력 주파수 내전압 | 3000V 교류 |
| 주택 자재 | PBT, UL94 V0 난연제 |
| 단자 재료 | 0.5 mm thick phosphor bronze |
| 접촉 저항 | ＜ 5 mΩ |
| 절연 저항 | > 100MΩ |
| 장착 방법 | 패널 장착형, 나사 너트 고정 |
선발 및 지원 안내
When selecting this 5×20 mm panel mount fuse holder, confirm fuse dimension, system voltage type (AC/DC), and continuous operating current first. Choose matching‑rating 5×20 glass/ceramic cartridge fuses and keep a 1.25‑1.5× safety margin against continuous‑load overheating. For projects requiring front‑panel fuse change‑out, this threaded‑nut panel‑mount variant reduces maintenance work without opening equipment housing. Prefer UL94 V0 PBT‑housing parts for high‑temperature or arc‑risk environments. Verify panel cut‑out dimension matches drawing specifications for secure mounting and stable electrical contact.
일반적인 적용 시나리오
- Industrial control cabinets and small‑automation‑equipment circuits
- Switching power supplies, power adapters and power‑distribution units
- Test instruments, multimeters and laboratory bench power‑supply circuits
- Household appliances and small‑power commercial electrical equipment
- Communication equipment and network‑device power‑input protection
- LED power drivers and low‑voltage small‑power modules
- Medical auxiliary equipment and low‑voltage control‑system circuits
설치 및 유지 관리 지침
1. Select correct‑rating 5×20 mm glass / ceramic cartridge fuse per your circuit‑protection requirements.
2. Drill standard mounting hole on equipment panel; insert fuse holder from front face, fasten rear fixing nut to achieve firm installation.
3. Secure wiring to rear terminals properly and add necessary insulation protection to prevent short‑circuit hazards.
4. Insert cartridge fuse fully and tighten cap to guarantee reliable contact and insulation performance.
5. 절연 파괴 및 안전 위험을 방지하기 위해 명시된 정격 전압-전류 제한 범위를 초과하여 작동하지 마십시오.
6. Cut off full power supply before fuse replacement to prevent electric shock and accidental short‑circuit damage.
7. Periodically inspect terminals and fuses for looseness, oxidation or thermal overheating signs; replace components in time when anomalies are found.
자주 묻는 질문
Q1: Which fuse sizes does this panel mount fuse holder accept?
A1: It accepts standard 5×20 mm glass and ceramic cartridge fuses, the most widely‑used small‑size specification for low‑voltage equipment circuit‑protection.
Q2: What are its rated current and voltage ratings?
A2: Rated current is 10A; rated voltage 250V /125V for both AC and DC, suitable for most small‑power electrical‑equipment‑protection scenarios.
Q3: 본체는 어떤 재질로 만들어졌나요?
A3: Housing uses PBT engineering plastic with UL94 V0 flame‑retardant grade, featuring good heat‑resistance, arc‑suppression and insulation‑performance.
Q4: What about insulation‑related electrical‑performance?
A4: 3000V AC power‑frequency withstand voltage; insulation resistance >100 MΩ to ensure safe low‑voltage‑circuit‑operation.
Q5: What are the terminals specifications?
A5: Terminals are constructed from 0.5 mm‑thick phosphor bronze; contact resistance is less than 5 mΩ with stable spring clamping force.
Q6: What mounting style does it adopt?
A6: Threaded‑nut panel‑mount design. Install from equipment front‑panel and fasten nut from rear side for stable installation and convenient fuse‑replacement maintenance.
Q7: What are main application‑fields?
A7: Applied for industrial‑control cabinets, switching power‑supplies, test instruments, household appliances, communication‑equipment and various small‑power AC‑DC over‑current‑protection circuits.
