이중 회로 배터리 퓨즈 홀더, 베이클라이트 재질, UL94-V0 등급, 최대 800A, 12-500V DC

GFEVG-Dual-circuit-battery-fuse-holder

GFEVG® dual‑circuit battery fuse holder is heavy‑duty high‑current dual‑loop battery fuse seat designed for automotive and marine battery‑protection fuses. It adopts black bakelite UL‑94 V‑0 flame‑retardant base, fitted with standard‑compliant stainless‑steel fasteners. Single‑circuit rated up to 400A, dual‑circuit combined maximum 800A, working voltage range 12‑500V DC. With 2KA breaking capacity, 1500VAC withstand voltage, low contact resistance and ultra‑high insulation resistance. Widely used for vehicle, yacht, ship battery‑bank short‑circuit and over‑current DC protection systems.

핵심 기능

• Base housing: Black bakelite material, UL‑94 V‑0 flame‑retardant safety grade
• Fastener hardware: Stainless‑steel hardware complying with GB/T 20878‑2007 stainless‑steel material standard
• High‑current capability: Single‑circuit 400A; dual‑circuit combined maximum 800A
• Electrical performance: 12‑500V DC rated voltage, 2KA breaking capacity, 1500VAC dielectric withstand voltage
• Excellent contact performance: Contact resistance ＜5mΩ; insulation resistance＞100MΩ
• Dual‑circuit layout for two independent fuse‑protection loops in one compact holder
• Designed for automotive, boat and yacht heavy‑duty battery‑protection applications

일반 사양

외형 치수

일반적인 적용 시나리오

• Automotive heavy‑duty battery bank DC over‑current & short‑circuit protection
• Yacht, boat and marine vessel battery‑protection power‑distribution system
• RV, recreational vehicle high‑current battery‑circuit protection
• Off‑grid energy‑storage battery‑bank dual‑loop DC protective assembly
• Heavy‑duty mobile‑equipment main‑battery protection circuits

Match this gfevg dual‑circuit battery fuse holder with our high‑current bolt‑on battery fuses to build complete dual‑loop heavy‑current battery‑protection assembly.

설치 및 안전 지침

• Disconnect battery / DC main‑power before fuse installation or replacement to prevent short‑circuit hazard.
• Apply correct tightening torque for M8 fasteners; insufficient torque will produce over‑heating under heavy‑current load.
• Each single circuit must not exceed 400A rated current; total dual‑circuit combined load shall not exceed 800A.
• Select matched battery‑protection fuse according to actual continuous working‑current for each independent circuit.
• 밀폐된 고온 설치 구획에 대한 온도 저하 평가를 수행하십시오.
• Regularly inspect fastener tightness for vehicle / marine vibration‑prone operating environments.

자주 묻는 질문

Q: What is gfevg dual‑circuit battery fuse holder?
A: GFEVG dual‑circuit battery fuse holder is heavy‑duty dual‑loop high‑current battery fuse holder with black bakelite UL‑94 V‑0 housing. Single‑circuit rating 400A, dual‑circuit max combined 800A for 12‑500V DC automotive and marine battery‑protection systems.

Q: What is the maximum current rating of this holder?
A: Each single‑circuit supports up to 400A; dual‑circuit total combined maximum current reaches 800A.

Q: What are the key electrical‑performance parameters?
A: Rated DC voltage:12‑500V DC; breaking‑capacity 2KA; withstand voltage 1500VAC; contact resistance＜5mΩ; insulation resistance＞100MΩ.

Q: What material is the base and hardware?
A: Base: black bakelite UL‑94 V‑0 flame‑retardant; fasteners adopt stainless‑steel material complying with GB/T 20878‑2007 standard.

Q: Where can this dual‑circuit battery fuse holder be used?
A: Suitable for cars, yachts, marine vessels, RV and off‑grid energy‑storage heavy‑current battery‑bank DC‑protection applications.

견적 및 기술 지원 요청

Please provide quantity and application requirements. Our engineering team can supply dimension drawings, bulk‑price quotation and component‑selection advice for your heavy‑current battery‑DC‑projects.