GF-702 horizontal medium-car insert fuse holder PCB mount clip, 30A 500VAC
GF-702 horizontal medium-car insert fuse holder PCB mount clip, 30A 500VAC
Kailangan mo ba ng Fuse para sa Proyekto Mo?
Ibahagi sa amin ang iyong mga kinakailangan para sa gabay sa produkto at isang sipi.
Product size installation diagram:
GF-702 horizontal medium-car insert fuse holder PCB mount clip
GF-702 horizontal medium-car insert fuse holder PCB mount clip is a horizontal PCB-soldered fuse clip designed for medium-size automotive ATO blade fuses. It adopts 0.3 mm thick brass contacts with tin-plated finish and flame-retardant PBT UL-94V-0 base. Offering stable electrical conductivity, qualified insertion-extraction force and high dielectric strength for automotive PCB over-current and short-circuit protection. It matches our GF-B ATO medium blade fuse.GF-702-auto-fuse-holder
Mga Pangunahing Tampok
- Model: GF-702 horizontal medium-car insert fuse holder PCB mount clip
- Compatible Fuse: Medium-size automotive ATO blade fuses
- Contact Material: Brass, thickness T=0.3 mm, tin-plated
- Base Housing: PBT UL-94V-0 flame retardant plastic
- Mounting Method: PCB horizontal through-hole soldering installation
- Electrical Rating: 30A @ 500VAC
- Minimum insertion & extraction force: 1kg
- High dielectric strength, low contact resistance
- Max temperature rise: 130°
- Recommended soldering condition: 260 ℃ for 3 seconds
- Compact footprint, saves PCB layout space
- Good vibration resistance for automotive working environment
Mga Teknikal na Espesipikasyon
| Modelo ng Produkto | GF-702 horizontal medium-car insert fuse holder PCB mount clip |
| Matching Fuse | Medium-size Automotive ATO Blade Fuse |
| Contact | Brass T=0.3mm, Tin-plated |
| Base Material | PBT UL-94V-0 Flame Retardant |
| Electrical Rating | 30A @ 500VAC |
| Insertion & Extraction Force | Min. 1kg |
| Dielectric Strength | Min. AC 1000V |
| Paglaban sa Kontak | Max. 50mΩ |
| Max Temperature Rise | 130° |
| Insulation Resistance @500V DC | Min. 100MΩ |
| Recommended Soldering Condition | 260 ℃, 3 seconds |
| Installation | PCB Horizontal Through-hole Mount |
Mga Senaryo ng Aplikasyon
GF-702 horizontal medium-car insert fuse holder PCB mount clip is widely used for automotive ECU, vehicle lighting control boards, on-board power modules and other automotive electronic PCBs. It supports quick replacement for medium-size ATO blade fuses after overload or short-circuit fault.
Installation Notes
- Horizontal through-hole soldering on PCB; confirm component footprint before PCB layout
- Only compatible with medium-size ATO blade fuses, not fit MINI / Maxi blade fuses
- Do not exceed rated current and voltage during application
- Comply with 260 ℃-3s soldering requirement to prevent plastic base damage
- Periodic inspection is recommended for equipment working under continuous vehicle vibration
Packing & Supply
Bulk packing or tape & reel packing available. Sample testing support, OEM customization and stable mass-volume supply for automotive electronics manufacturers.
Mga Madalas Itanong
Q: Which fuse matches GF-702 horizontal medium-car insert fuse holder PCB mount clip?
A: It is designed for medium-size automotive ATO blade fuses.
Q: What is the mounting style of GF-702?
A: GF-702 adopts horizontal PCB through-hole soldering installation.
Q: What is the electrical rating for GF-702?
A: Rated 30A @500VAC, minimum insertion-extraction force is 1kg.
Q: What is the soldering requirement for GF-702?
A: Recommended soldering condition: 260 ℃ for 3 seconds.
